Number plate?

[Deleted User 4752]

How the hell are you aware that the ends flap about?

You can’t?

I can't see it from the driving seat funnily enough and if it makes a noise it's either inaudible or I'm too deaf to hear it. If it's the later then may age and failing senses might have some benefits after all

The other benefit to age is all that exercise I’m getting walking to the toilet and back every 20 mins throughout the night….

What were we talking about again?

[Neil1911]

Your flappy ends, if my memory serves...

[azmj]

Doesn’t the Macan have pre drilled screw holes on the body?

The holes are normally drilled at the dealer upon delivery.
You can request for them not to do this - just make it very clear - my GT4 had no holes drilled and they provided the plates with sticky pads.

[Deleted User 4752]

Your flappy ends, if my memory serves...

[TK421]

Buy the genuine 3M grey automotive double sided tape, make sure it’s genuine. Double it up where needed. Best in the business, used this for many years. I repeat make sure it’s genuine and not cloned crap.

[bennachie]

Simply 'pre bend' the plate. Put the curve in held with masking tape. Off the car obviously. Judiciously apply heat. Allow to cool. Curvature matches the vehicle, double sided tape and robert is your father's brother.

[Skyway]

Doesn’t the Macan have pre drilled screw holes on the body?

The holes are normally drilled at the dealer upon delivery.
You can request for them not to do this - just make it very clear - my GT4 had no holes drilled and they provided the plates with sticky pads.

Did they attach with the sticky pads or did you do it?

[Skyway]

Have most people requested that the dealer doesn’t drill holes?

[MTUK]

This is what I use .... cut it to length.

[Bluesnose1812]

Velcro gives variable thickness