As mentioned above, the bumps stops can be adjusted and I believe my wings were adjusted also. As it is clearly a bonnet width issue I wonder if some body shops are either (1.) bending the aluminium bonnet or (2.) adjusting all the panels to suit the bonnet?AllanG wrote: ↑Wed Dec 22, 2021 3:31 pmLuckily, my bonnet didn’t ‘stick out’ at the sides by the door edges, it was just the gaps between the wings that needed adjustment, and I think this was achieved by adjusting the various ‘bump stops’, which can be seen along the top of the wings when the bonnet is open.
Mine is certainly not as bad as it it was, but certainly isn’t perfect.