I noticed that the Multi Function Display on my GEN 3 was glitchy.
Using the scroll button, I found the pages did not scroll properly, or would jump two pages at a time, or I had to scroll down twice to get the next page etc.
Whilst at the OPC for another matter, I mentioned this to them and was told there is a software update that needed to be applied, and that the glitches within the MFD was one of the issues the update will address.
So, if you are experiencing similar, you need a software update.
GEN3 MFD Glitchy?
Thanks Bazza for the insight is that an over the air update or one for the OPC ?Bazza06 wrote: ↑Mon Nov 22, 2021 11:15 pm I noticed that the Multi Function Display on my GEN 3 was glitchy.
Using the scroll button, I found the pages did not scroll properly, or would jump two pages at a time, or I had to scroll down twice to get the next page etc.
Whilst at the OPC for another matter, I mentioned this to them and was told there is a software update that needed to be applied, and that the glitches within the MFD was one of the issues the update will address.
So, if you are experiencing similar, you need a software update.
Regards
- Nuclear Nick
- Posts: 3816
- Joined: Wed Feb 17, 2016 3:42 pm
- Location: Bristol
That would be a first for Macan I think. I haven't heard of that being possible for system updates a la Taycan yet.Highflyer99 wrote: ↑Tue Nov 23, 2021 7:05 amThanks Bazza for the insight is that an over the air update or one for the OPC ?Bazza06 wrote: ↑Mon Nov 22, 2021 11:15 pm I noticed that the Multi Function Display on my GEN 3 was glitchy.
Using the scroll button, I found the pages did not scroll properly, or would jump two pages at a time, or I had to scroll down twice to get the next page etc.
Whilst at the OPC for another matter, I mentioned this to them and was told there is a software update that needed to be applied, and that the glitches within the MFD was one of the issues the update will address.
So, if you are experiencing similar, you need a software update.
Regards
Nick
Defender 90 V8
991.2 C2 GTS
Macan Turbo - sold
BMW K1300S, BMW R1250 GSA
Defender 90 V8
991.2 C2 GTS
Macan Turbo - sold
BMW K1300S, BMW R1250 GSA
My navigation updates have all been over the airwaves, they are visible with the % progress displayed. No idea if anything else has been updated, nothing seen and no special OPC visits been required.
http://www.porsche-code.com/PP37WLA6, a Dolomite Silver S, collected from Stockport OPC on Valentine's Day 2023, after a 399 day wait.
Ex.: Gen2 S, Volcano grey 1/9/19 - 3/2/23 & 39,235 Smiles, RIP
Ex.: Gen2 S, Volcano grey 1/9/19 - 3/2/23 & 39,235 Smiles, RIP
-
- Posts: 100
- Joined: Mon Jul 27, 2020 3:33 pm
- Location: Leicestershire
This will be for navigation data / map updates and not for the actual car software / firmware update to fix issues with MFD - for that, I would think that an OPC visit would be required
HTH
Just following up on this.
Has any other GEN3 owner noticed the Multi Function Display does not always freely scroll up or down?
I've noticed that the display sometimes stalls and then jumps up or down 2 spaces.
Sometimes it flows without issue, but will then revert.
Software on the car has been reset several times, but it is still occurring.
I'm keen to know if others have the same issue.
Has any other GEN3 owner noticed the Multi Function Display does not always freely scroll up or down?
I've noticed that the display sometimes stalls and then jumps up or down 2 spaces.
Sometimes it flows without issue, but will then revert.
Software on the car has been reset several times, but it is still occurring.
I'm keen to know if others have the same issue.
Previously owned:
2022 Macan GTS Gentian Blue
Macan SD - Volcano Grey
Boxster S - Polar Silver
2022 Macan GTS Gentian Blue
Macan SD - Volcano Grey
Boxster S - Polar Silver
-
- Posts: 1656
- Joined: Sat Sep 18, 2021 1:16 pm
- Location: Worcestershire
I think it's a problem with the roller switch on the wheel. Get a can of electrical contact cleaner and give it a squirt. Don't use wd40!
Currently
S|Leather|Air Susp|Chrono |Surround Camera|BOSE|14 way | AILPG |
http://www.porsche-code.com/PPSV6RD5
Next Project GTS March 2025
https://configurator.porsche.com/porsche-code/PS4LDHS7
S|Leather|Air Susp|Chrono |Surround Camera|BOSE|14 way | AILPG |
http://www.porsche-code.com/PPSV6RD5
Next Project GTS March 2025
https://configurator.porsche.com/porsche-code/PS4LDHS7
Never even considered that.Bluesnose1812 wrote: ↑Tue Jan 25, 2022 9:04 pm I think it's a problem with the roller switch on the wheel. Get a can of electrical contact cleaner and give it a squirt. Don't use wd40!
The car is going back to the dealer next week. I will ask them to explore that.
Thank you.
Previously owned:
2022 Macan GTS Gentian Blue
Macan SD - Volcano Grey
Boxster S - Polar Silver
2022 Macan GTS Gentian Blue
Macan SD - Volcano Grey
Boxster S - Polar Silver
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1478 Views
-
Last post by pstrat
-
- 8 Replies
- 1280 Views
-
Last post by IanGent
-
- 25 Replies
- 6622 Views
-
Last post by Plyphon
-
- 1 Replies
- 4642 Views
-
Last post by Scaramanga